How many pallets fit in a truck?

A 53 ft dry van swallows 26 standard pallets single-stacked — but EUR pallets and double-stacking change the math. Pick your pallet and get the count.

Enter your setup

Your pallet
Length × width.
layers
Double-stacking needs stable, uniform loads.
Trailer
Interior L×W×H in cm.
Use positive measurements and valid numbers.

Your estimate

FREIGHT · PALLETS

Pallets that fit

–

Do you need to secure the load?

Hand-picked for this exact result — no generic lists.

Load it like a dispatcher.

Based on a 53 ft dry van interior of roughly 16.0 × 2.5 m.

  1. Know your pallet.

    GMA 48×40 in dominates North America; EUR 120×80 cm dominates Europe. They pack differently.

  2. Try both orientations.

    Pallets turned 90° often gain a full row — the calculator picks the best.

  3. Mind the weight.

    26 pallets of dense freight can exceed legal axle weights long before the cube fills.

  4. Secure every layer.

    Straps or load bars on the last layer stop the whole wall walking forward.

Worked example

One concrete case, with the assumptions spelled out.

GMA pallets in a 53 ft van

48×40 in pallets load 26 per layer in a 53 ft dry van — the industry-standard full truckload.

EUR pallets in a 40 ft container

A 40 ft container fits 20 EUR pallets per layer in a straight layout; mixed orientations, some pallets turned, reach about 25. That gap is why container counts are quoted as a range in practice.

EUR pallets in a 53 ft dry van

At 120×80 cm, EUR pallets tile the same trailer more efficiently: about 33 per layer against 26 GMA. Pallet footprint, not trailer size, is what changes, which is why cross-border loads are planned per pallet type.

ƒ(x)per layer = max(floor(L÷pl)×floor(W÷pw), floor(L÷pw)×floor(W÷pl))

Pallets in a shipping container

Containers are narrower than trailers and their doors are narrower still, so the floor pattern, not the volume, decides the count. Pick a container and a pallet type: the calculator works through the standard straight and turned layouts for 20 ft, 40 ft and 40 ft high-cube boxes, single-stacked, the way most freight actually ships. Note that a high-cube adds height, not floor space, so its pallet count matches the standard 40 ft unless your freight can use the extra headroom by stacking.

Enter your setup

Container
Interior L×W×H in cm.
Your pallet
Length × width.
Use positive measurements and valid numbers.

Your estimate

FREIGHT · CONTAINER

Pallets that fit

–

Do you need to secure the load?

Hand-picked for this exact result — no generic lists.

How these estimates work

Pallet counts are floor-pattern maths, not volume maths. A 53 ft dry van has about 16.15 m of usable floor length and 2.59 m of width: two rows of GMA pallets (122×102 cm) sit side by side, and 13 pallets per row gives the industry-standard 26. Turning pallets or pinwheeling them trades a little length for a better width fit, which is how the same trailer occasionally swallows one or two more. The container calculator runs the same patterns against container floors, which are narrower: 2.35 m inside, with a door opening tighter than that.

Stacking multiplies the floor count only when the freight allows it: the load has to be flat, stable and crush-proof, and most palletised freight is none of the three. Weight is the other limit, and it often binds first. A 53 ft trailer is typically legal around 20,000 to 24,000 kg of payload depending on the tractor, and a 40 ft container payload is roughly 26,000 to 28,000 kg, so 26 pallets of dense freight can max out the scales while the floor still looks empty. Spread heavy pallets evenly over the axles either way.

VehicleGMA 48×40 inEUR 120×80 cmNotes
53 ft dry van26about 33standard single-layer patterns
48 ft trailer24about 30two rows lengthwise
28 ft pup trailer14about 16often used in pairs
20 ft container1011single-stacked
40 ft container2020 straight, about 25 mixedsingle-stacked

Frequently asked questions

How many pallets fit in a 53 ft trailer?

26 standard GMA pallets in the industry-standard loading pattern.

How are pallets arranged in a truck?

Two rows lengthwise; the standard pattern fits 26 GMA pallets in a 53 ft dry van.

Can you double-stack pallets in a truck?

Only with stable, crush-proof loads — otherwise single-stack it.

What about weight limits?

26 pallets of dense freight can hit legal axle weights before the cube fills — distribute evenly.

How many pallets fit in a 40 ft container?

20 standard GMA pallets single-stacked, 10 per row in 2 rows. EUR pallets fit 20 in a straight layout and about 25 with mixed orientations. The container calculator on this page runs your pallet type.

What is a GMA pallet?

The North American standard pallet: 48×40 inches (122×102 cm), the size grocery and general freight supply chains are built around.

How many pallets fit in a 20 ft container?

10 GMA pallets single-stacked, or 11 EUR pallets. Exactly the small end of the range: a 20 ft box is a half-length 40 ft for floor space, but the door and the narrower floor cost it a pallet against the simple half.