How many records fit in a Kallax?

How many records fit in a Kallax? This vinyl shelf capacity calculator answers it exactly: pick your Kallax model, set your average record thickness, and get the LP count — per cube and total.

Enter your setup

Your Kallax
Each cube opening is 33 × 33 cm; the unit is 39 cm deep.
Your records
cm
Typical single LP jacket. Gatefolds and box sets need more.
%
Keeps records easy to flip through.
records
Use positive measurements and valid numbers.

Your estimate

VINYL LP · KALLAX

Estimated total capacity

–

yours

Do you need more Kallax cubes?

Hand-picked for this exact result — no generic lists.

Measure once. Trust the estimate.

A Kallax cube is 33 × 33 cm inside and 39 cm deep — LPs (31.5 cm) fit with room to spare.

  1. Measure a 20-record stack.

    Line up 20 typical records, measure without squeezing, divide by 20. This catches gatefolds and box sets.

  2. Don't pack cubes tight.

    A 5% allowance protects against ring wear and makes flipping possible.

  3. Mind the weight.

    A full 2×4 Kallax of vinyl can weigh 180–200 kg — and a single full cube (~22 kg) already exceeds IKEA's 13 kg-per-shelf rating. Anchor the unit to the wall, always.

  4. Use the depth.

    At 39 cm deep, a Kallax swallows LPs whole — nothing sticks out.

Worked example

One concrete case, with the assumptions spelled out.

2×4 Kallax, standard LPs

At 0.35 cm per record, one cube holds about 89 records. Across 8 cubes that's 712 records with handling room.

120 cm shelf, standard LPs

At 0.35 cm per record with 5% handling room, a 120 cm shelf holds about 326 records. The same shelf of gatefolds at 0.5 cm would hold closer to 228, which is why the thickness input matters.

500 records, moving day

At roughly 57 records per 20 kg box, a 500-record collection needs 9 boxes and weighs about 175 kg in total. Spread across boxes that size, every box stays a one-person carry.

ƒ(x)per cube = floor(33 ÷ (thickness × (1 + allowance ÷ 100)))

Records on any shelf, by length

Not every collection lives in a Kallax. If your records sit on a plain shelf, a crate or a run of bookcase, this is the same maths without the IKEA frame: total shelf length divided by average record thickness, with a packing allowance so the last record is not wedged in. Measure your longest run and add the runs together.

Enter your setup

Your shelf
cm
The usable length records will occupy.
Your records
cm
Measure a 20-record stack and divide by 20.
%
Keeps records easy to flip through.
records
Use positive measurements and valid numbers.

Your estimate

VINYL LP · SHELF

Records that fit

–

yours

Do you need record storage?

Hand-picked for this exact result — no generic lists.

Records in a 13-inch cube

Fabric cubes, milk crates and cube storage all share roughly the same 13-inch opening. A standard cube gives you about 32 cm of usable width, which works out to roughly 85 standard LPs per cube. Enter your cube opening and record thickness for your number, and keep the packing allowance in: records stored drum-tight warp and ring-wear faster.

Enter your setup

Your cube
in
Measure the inside opening, not the outside.
Your records
in
Typical single LP jacket ≈ 0.14 in.
%
Use positive measurements and valid numbers.

Your estimate

VINYL LP · CUBE

Estimated capacity

–

Do you need more storage cubes?

Hand-picked for this exact result — no generic lists.

Moving boxes for a record collection

Moving records is a weight problem, not a space problem. This calculator starts from your collection size and a maximum weight per box, then works out how many boxes you need and what the pile will weigh in total, so no single box becomes a two-person lift.

Enter your setup

Your collection
records
cm
Box limits
cm
Small moving boxes (~16 in) are best for vinyl.
kg
Movers' rule of thumb. 20 kg is already heavy.
Use positive measurements and valid numbers.

Your estimate

MOVING · VINYL

Boxes needed

–

Do you need the right boxes?

Hand-picked for this exact result — no generic lists.

How these estimates work

Vinyl capacity is a thickness calculation. One LP in its jacket averages about 0.35 cm, so usable width divided by 0.35 gives the count: a Kallax cube with about 33 cm of clear width holds roughly 89 records before the packing allowance, and a 120 cm shelf holds about 326 once 5% handling room comes off. The Kallax calculator multiplies the per-cube count by the cubes in your model, the cube calculator uses your own opening size, and the moving-box calculator ignores space almost entirely and caps each box by weight instead.

Your own average matters more than the default. Gatefolds, 180 g pressings and records in outer sleeves all run thicker: a shelf heavy on gatefolds can average 0.5 cm per record and hold a third fewer LPs than the standard estimate. Measure a stack of 20 records from your own shelves and divide by 20. Weight is the second check: a full Kallax cube of vinyl is about 22 kg, which already passes IKEA's 13 kg per-shelf rating, so a loaded Kallax belongs on the floor, anchored to the wall, never stacked loose.

Record typeTypical thicknessRecords per 33 cm cube
Standard LP, plain sleeveabout 0.3 cmabout 100
Standard LP in jacketabout 0.35 cmabout 89
Gatefold or 180 g pressing0.45 to 0.55 cmabout 60 to 70
7-inch singleabout 0.25 cmfits the cube, but measure separately

Frequently asked questions

How many records fit in one Kallax cube?

About 89 standard LPs per 33×33 cm cube at 0.35 cm average thickness with 5% handling room.

Will a 4×4 Kallax hold 1,000 records?

Easily — 16 cubes hold about 1,400 LPs at standard thickness, with room to spare.

How heavy is a Kallax full of vinyl?

A full 2×4 Kallax of vinyl can weigh 180–200 kg — a single full cube (~22 kg) already exceeds IKEA’s 13 kg-per-shelf rating. Anchor it to the wall, always.

Do gatefolds change the count?

Yes. Measure a 20-record stack from your own collection and use that average instead of 0.35 cm.

How many records fit in a 13-inch cube?

About 85 standard LPs in a cube with roughly 32 cm of usable width. The cube calculator on this page adjusts that for your opening size and your records’ thickness.

How many moving boxes do I need for 500 records?

About 9 boxes at a 20 kg per-box limit, roughly 57 records per box. With vinyl the weight limit is always reached before the box looks full.

How much does one record weigh?

Roughly 200 to 280 g including jacket and inner sleeve, with 180 g pressings at the top of the range. That is why a full Kallax cube reaches about 22 kg.